Chemistries                  603-2779 2080

Digital 3/4" Combination pH/ORP Sensor, Insertion Style, PVDF Body Material, General Purpose Glass pH Electrode

Digital 3/4
Product #: DPC2K1A
Brand: GLI
Unit Price Contact Hach

Low Price-Great Performance

These combination sensors are designed for specialty applications for immersion or in-line mounting. The reference cell features a double-junction design for extended service life, and a built-in solution ground. The body is molded from chemically-resistant PPS or PVDF, and the reference junction is coaxial porous PTFE. All sensors are rated 0 to 105ºC up to 100 psig, and have integral 4.5 m (15 ft.) cables with tinned leads. The PC-series (for pH) and RCseries (for ORP) combination sensors are ideal for measuring mild and aggressive media.

Special Electrode Configurations

Sensors with rugged dome electrodes, “easy-to-clean” flat glass electrodes, and even HF (hydrofluoric acid) resistant glass electrodes are available for a wide variety of process solutions.

Temperature Compensation Element Option

The PC-series combination pH sensors are available with or without a Pt 1000 ohm RTD temperature element. The RC-series combination ORP sensors are supplied without a temperature element.

Versatile Mounting Styles

Sensors are available in three mounting styles—convertible, insertion, and sanitary.

Full-Featured “Plug and Play” Hach sc Digital Controllers

There are no complicated wiring or set up procedures with any Hach sc controller. Just plug in any combination of Hach digital sensors and it’s ready to use—it’s “plug and play.”

What's included?

Includes: sensor with 15 ft cable, digital gateway, 3 ft digital extension cable and manual

Specifications

Accuracy: 0.1 pH under reference conditions
Body Material: PVDF
Electrode Material: General Purpose Glass pH Electrode
Material: PVDF
Measuring range: Combination pH Sensors 0 - 14 pH
Operating temperature range: 0 - 105 °C
Pressure Range: 0 - 6.9 bar at 100ºC (0 - 100 psig at 212ºF)
Sensor Cable: Integral coaxial cable (plus two conductors for temperature compensator option); 4.5 m (15 ft.) long
Sensor Thread: 0.75"
Specifications: Most pH applications fall in the 2.5-12.5 pH range. General purpose pH glass electrodes perform well in this range. Some industrial applications require accurate measurements and control at pH values below 2 or above 12. Consult Hach Technical Support for details on these applications.
Temperature Compensation: Pt 1000 ohm RTD
Transmission Distance 2: Signal Transmission Distance 1000 m (3280 ft.) when used with the Hach Digital Gateway, Termination Box, and sc100 Controller.
Warranty: 3 months
Wetted Materials: PVDF, PTFE double junction, glass electrode, FKM/FPM O-rings
What's included?: Includes: sensor with 15 ft cable, digital gateway, 3 ft digital extension cable and manual