Chemistries                  603-2779 2080

Kipp & Zonen DustIQ Soiling Monitoring System, Mounting Clips, Panel Temperature Sensor

Kipp & Zonen DustIQ Soiling Monitoring System, Mounting Clips, Panel Temperature Sensor
Product #: 0386915
Brand: KIPP___ZONEN
Unit Price Contact Hach

Know exactly when to clean

Set alarms in your system software to indicate when a certain soiling ratio has been reached and cleaning is needed.

Maintenance free

It has no moving parts and it does not need sunlight to make its measurements. The DustIQ is cleaned when all other panels are cleaned

Convenient set-up

The sensor is integrated into leading plant management software.

Specifications

Accuracy: Transmission loss:
±0.1 of reading ±1% (after local dust calibration)
Cable: No cable
Daisy-chain Capability: Three instruments max. in one chain.
Only the last device can have the PV panel temperature
sensor attached.
Digital outputs: RS485 Modbus RTU
Dimensions: 990 x 160 x 35 mm
Interface: 2-wire RS-485 RTU using Modbus
IP Rating: IP65
Material Enclosures: Aluminum, anodized
Maximum Voltage: The maximum differential between either of the Modbus® RS-485 lines (yellow and grey) and the power ground / RS-485 common line (black) is 70 VDC.
Measuring range: Back of module temperature sensor: -4 to +212 °F, ±1.8 °F (-20 to +100 °C, ±1 °C)
Operating temperature range: -20 to +60 ˚C
Outputs: Percentage of sunlight that is blocked or scattered in such a way that it does not reach the actual solar cells 0 to 50%
Output Values: Soiling Ratio (SR) 100 to 50% and Transmission Loss (TL) 0 to 50%
Power Consumption: ˂ 2.5 W
Power supply: 12 to 30 VDC, 70 to 200 mA; < 2 W
Standard storage temperature: -20 to +80 ˚C
Tilt X and Y-axis: -180° to 180° ; ±1°