Chemistries                  603-2779 2080

Portable Multi-Parameter WQ Sensor Module with DO-Sensor, 30 m Cable (WMS30-0-31)

Portable Multi-Parameter WQ Sensor Module with DO-Sensor, 30 m Cable (WMS30-0-31)
Product #: 101366
Unit Price Contact Hach

Superior reliability in low range turbidity measurement

Repeatability in low range measurement is ±1% .

Saves up to 200 data

Automatic memory at fixed time intervals is also possible and it is effective for simple monitoring etc.

• Short interval memory function: 2 sec.-99 min. 59 sec. or Long interval memory function: 2 min. 99 min. After 1 min. measurement, it will be in sleep mode.
• This sensor module does not have cleaning function. In order to maintain measurement accuracy, frequent cleaning of the sensor part is required.
• This sensor module is not for continuous measurement. When performing simple monitoring, please keep continuous use time within 24 hours.

Compact and robust

Small-size and easy to hold the Main unit with one hand. WQC-30 is water-proof, dust-proof, robust, and suitable for field-use. It´s lower energy consumption design assure long battery life.
• Dimensions: Main Unit approx. 68(W) × 35 (H) × 173 (D) mm
• Weight: Main Unit approx. 290g (including batteries)
• IP67 rated

System extensibility
(Connectable to PC, external printer)

Measurement data can be exported to PC in text
format with data collection software.

Specifications

Dimensions: Main Unit: Approx. 68 (W) × 35 (H)×173 (D) mm
  Sensor Module: Approx. φ55×476 mm
Display: pH: pH -2.00 - pH 16.00
Temperature: -5.0 - 110.0℃
Turbidity: 0.0 - 88.0 NTU (mg/L); 0 - 880 NTU (mg/L)
Conductivity: 0.0 - 202.0 mS/m; 0.000 - 2.020 S/m; 0.00 - 20.20 S/m
Salinity: 0.00 - 4.04％ (NaCl) / 0.00 - 40.40 (PSS)
DO: 0.00 - 22.00 mg/L / 0 - 220 %
IP Rating: Main unit: IP67 (Effective when connected to sensor and when output/input part is masked) * 1m、30 min immersion possible
Measurement method: pH: Glass electrode method
Temperature: Thermistor resistor method
Turbidity: 90℃ light scattering method
Conductivity: AC 4 electrode method
Salinity: Conversion from Conductivity
DO: Membrane type polarographic method
Measuring range: pH: pH 0.00 - pH 14.00
Temperature: 0.0 - 50.0℃
Turbidity*: 0.0 - 80.0 NTU (mg/L); 0 - 800 NTU (mg/L); Range switch: Automatic/Manual
Conductivity: 0.0 mS/m - 10.00 S/m; Range switch: Automatic/Manual
Salinity: 0.00 - 4.00% (NaCl) / 0.00 - 40.00 (PSS)
DO (optional): 0.00 - 20.00 mg/L / 0 - 200 %

*Turbidity when calibrating with formazine standard solution is shown as NTU and turbidity when calibrated with kaolin standard solution is shown as mg/L. (SS conncentration can not be measured.)
Operating temperature range: 0- 45℃ (0 - 40℃ when using optional AC adapter or external printer)
Outputs: RS-232C (Non-insulated)：PC or external printer EPS-P30 (optional)
Parameter: pH, Conductivity, Turbidity, Temperature, Salinity, Dissolved Oxygen
Power supply: AA battery/Nickel hydrogen battery (2) or AC adapter (7 VA optional)
Repeatability: Under certain conditions
  Conductivity: Within ± 1% (FS) each range
  DO (optional): Within ±0.1 mg/L / ±2 %
  pH: Within ±0.05 pH
  Salinity: Within ± 0.04% (NaCl) / Within ± 0.42 (PSS)
  Temperature: Within ±0.5℃
  Turbidity: Within ±1% (FS), Within ±0.8 NTU (0.0 - 80.0 NTU), Within 8 NTU (0 - 800 NTU)
Sample Flow Rate: Within 30 m (0.3 MPa equivalent)
Weight: Main Unit: Approx. 290 g (incl. batteries)
Sensor Module: approx. 1400 g (Cable length 2 m)